1 - 9
We produce reinforced concrete compact substations type PCS, rated up to 2 x 2500 kVA, operated from inside or outside, according to IEC 62271 - 202/2014.
Our concrete compact substations type PCS are "Type Tested", Italotehnica T&D Impex srl passed all type tests according to international standard IEC 62271 - 202/2014 in May June 2014 at Laboratory ICMET Craiova, one of the most major testing laboratories in the world and the second most important in Europe.
After testing our product obtained classifications:
Due to the latest technologies, we can achieve in concrete compact substations, with lengths up to 10 meters in a single cabin. The compact substations are transported to the recipient fully equipped including transformers. Thanks to the lifting system, guidance and impermeability between cabin and foundation, and between cabin and roof, of our compact substations are easy to install in a very short time with minimum personnel.
The compact substations types that we are produceing and selling, complies with all the requirements of the leading distributors of electricity in Romania, as follows:
7 - 7
We import and distribute in Romania MV switchgear for primary and secondary distribution designed and tested according to international standard IEC 62271-200.
Our selling range of cubicles, can operate in service voltages between 6 kV and 36 kV, currents between 400 A and 2500 A and short circuit currents from 12.5 kA up to 25kA.
Due to the complete functionality and modularity of our medium voltage cubicles, they can be used in various applications, from primary distribution substation and continuing with secondary distribution (compact substation cubicles) or industrial applications, engine starting or MV supply for industrial ovens.
Our cubicles are equipped with protections and control equipments made by top manufacturers in the industry like ABB, SIEMENS, SCHNEIDER.
In terms of loss of service continuity we sell cubicles classification is LSC2A or 2B.
Medium voltage cubicles sold by us are "Type Tested", type tests have been successfully passed at CESI laboratory in Italy.
Classification of our cubicles in terms of internal arc withstand is IAC AFLR 16kA 1s, which means that the cubicles have an internal arc withstand of 16 kA for 1 second on all sides AFLR - in front, side and rear.
We also sell in Romania the entire range of MV cubicles, approved by ENEL, acc. to DY400, DY800, DY803, DY696, DY696A specifications.
15 - 20
We import and distribute in Romania a wide range of power and distribution transformers with insulation in oil free of PCB from producers of Italy with decades of experience in building transformers. Oil-insulated transformers are produced according to international standard IEC 60076.
Transformers sold by us are 'Type Tested", type tests have been successfully passed at CESI testing laboratory Italy, acc. to IEC 60076-5 standard.
We can provide specially built power transformers with different transformation ratios:
15 - 17
Our company distribute in Romania a wide range of cast resin epoxy insulated transformers produced by one of the most famous European manufacturers with production facilities located in Italy, Argentina and Israel and decades of experience in the production of dry-type transformers.
The transformers are produced according to international standards IEC IEC 60076-11 (May 2004) HD 538.1, 538.2 HD, and DIN 42523.
Transformers are "Type Tested" being tested in test laboratory at CESI Italy, obtaining E2 class (medium), C2 (climate), F1 (fire) approvals.
In terms of applications there are available distribution transformers, traction transformers, for photovoltaic and wind power applications, Oil & Gas, Marine applications, industrial cranes, reactance and transformers forming neutral.
Distribution transformers are made in the power range 160 kVA - 3150 kVA and primary voltages between 6 kV and 36 kV with protection degree IP00, IP20, IP21, IP23, IP30, IP31 and normal losses, reduced or very reduced losses.
On request, we can realize transformers for special applications, with loss according to customer requirements, with power up to 25 MVA and insulation class up to 52 kV.
We also sell medium voltage measure transformers, of current and voltage complying with specifications of all electricity distribution operators in Romania, with model approval and metrological test reports issued by the Romanian Bureau of Legal Metrology acc. to the applicable laws.
7 - 10
We distribute in Romania a wide range of low voltage switchboards including Power Motor Control Center type, rated current up to 6300A, rated voltage 690V, 1000V isolation voltage, short current 100 kA / 1s, built in Italy in accordance with standards international IEC-CEI-EN 61439-1 and IEC-CEI-EN 61439-2.
Low voltage switchboards are "Type Tested" being tested at the test laboratories in CESI, ACAE, LOVAG and LUIGI MAGRINI 61439-1 and complying with IEC standards IEC 61439-2 results were positive.
In terms of internal arc, the panels were successfully tested at:
From the point of view of the separation, the low-voltage panels can be made in all forms of separation from 2, 2A, 2B, 3A, 3B, 4A, 4B, up to separation form 4B, including type 7.
Also sell the full range of low voltage panels according to approved ENEL DY3009, DY3010, DY3011, DY301, specifications, and all types of approved circuit breakers acc. to ENEL DY3101, DY3102, DY3103 specifications.
7 - 7
We offer competitive economic and technical solutions for electric energy supply of the various objectives.
We are actively involved in all phases of a project, from the idea stage to actual realization of electric installation.
We advice our clients in choosing the best and the most suitable solutions in terms of equipment performance, quality and reliability over time.
We make automation on medium voltage with a high degree of complexity in the compact substations and in the connection points that we build and we deliver to the electrical distribution operators around the country.
We provide consultancy in designing and interconnection to the distribution electricity grid of electric generators from unconventional sources, photovoltaic, wind, biomass or biogas plants acc. to all requirements imposed by ANRE and acc to the peculiarities imposed by the electricity distribution operators ENEL CEZ, EON, Electrica Muntenia Nord, Electrica Transilvania Sud and Electrica Transilvania Nord.
We offer complete solutions for Telecontrol and SCADA in MV as required by all distributions operators present in Romania.
Also we offer complete service, maintenance, warranty and post-warranty and assistance to commissioning of all equipment supplied by our company.
Concrete Compact Substation TYPE PCS
Oil Insulated Transformers
Dry Type Transformers or Cast Resin
Low Voltage Swicthboards
Italotehnica T&D © 2014 All right reserved